How to Connect HP Deskjet 2752 Printer to WiFi?

Connect HP Deskjet 2752 Printer to WiFi:

Do you need assistance connecting the HP Deskjet 2752 printer to wifi? Look nowhere else! In this blog post, we'll lead you through detailed directions on how to quickly and easily set up your HP Deskjet 2752 printer.

We'll demonstrate how to quickly set up your printer, from plugging in the wires to downloading and installing the required software. Then let's get going!

How to Install Ink Cartridges

Step 1: Please wait for the printer to initialize after turning it on.

Step 2: Under the control panel, unlock the front access door.

Step 3: Please wait for the ink cartridge chamber to slide into position, then enter once it has.

Step 4: Remove the red label that isn't in contact with ink cartridge connections.

Step 5: Put the colour side of the colour ink cartridge into place now. It will lock if you push it inward; the same is true for the black ink cartridge.

Step 6: Close the entrance. The new cartridges will be recognized by the printer instantly.

Step 7: Select "OK" on the printer's control panel to verify that the new cartridges were correctly installed.

Step 8: You can now start printing.

How to Connect a Printer

I'll now demonstrate how to set up this printer's WiFi. We will link this printer to our home or office WiFi network. The first step is to navigate to the screen presently. This printer has to be put into setup mode.

Wifi-Home and Office

Step 1: The printer must be turned on before we can wait for all the information to appear on the screen.

Step 2: We must press and hold the WiFi and cancel buttons for three seconds each. 1, 2, 3, etc. And we let it go. The power button will begin to flash before stopping to do so.

Step 3: After that, the wireless button will begin to blink. That indicates your printer is now in setup mode and prepared for a wireless connection.

Step 4: Go to the App Store on your Android device or other smartphone and download the HP Smart app.

Step 5: Activate the HP Smart app. The printer must now be added.

Step 6: Therefore, we press the + button. You can see that it reads "searching for the printers" on the top screen.

The following screen will now appear. No printer was detected, it says.

Step 1: You also have the option to set up a new printer at the same time. Toggle that.

Step 2: This printer will now be searched for, and you will find the Deskjet 2752 series.

Step 3: To connect your printer to WiFi, click here.

Step 4: So, if it needs to be corrected, see if there is a proper name for the WiFi network.

Step 5: After that, you can select the Change button. The password must now be entered on this screen. Continue. Since the password has been entered, it advises turning on Bluetooth.

Step 6: For your printer to be set up, Bluetooth is necessary.

Step 7: To enable Bluetooth on HP Smart, we click Continue. You will notice that it is connecting once your Bluetooth is turned on. Thus, the printer setup has begun. Press the printer's blinking data button, it states.

That's the information button that flashes, as you can see. Therefore, as soon as the printer's IP address has been obtained, we must click this information button.

Now that we can see it, the printer is WiFi connected. Thus, it is related. On the Continue button, we can tap.

Print Test Page

It is time to print a test page after you've connected your HP Deskjet 2752 printer and put the ink cartridges in. This will assist you in ensuring that your printer is configured and operates appropriately. How to configure an HP Deskjet 2752 to print a test page is given below:

• Open the Devices & Printers folder from the Start menu. Select "Print Test Page" from the menu by right-clicking your HP Deskjet 2752 printer.
• Your printer will print a test page with various colored boxes and lines. Ensure there is no fading or smudge and the colors remain sharp.
• Your HP Deskjet 2752 is suitable if the test page appears in acceptable condition.