Konica Minolta Printer Error Code List With Solutions

Konica Minolta Printer Error Code List With Solutions:

Error codes truly reflect a different reason for each kind of printer malfunction which applies in the case of your Konica Minolta printer as well. Your Konica Minolta printer’s troubleshooting is defined by means of several Konica Minolta Printer Error Codes which warrant a detailed discussion of the same.

So, next time you see a Konica Minolta Printer Error Code just draw reference from this unique guide that will make you aware about fixing such a Konica Minolta Printer Error Code promptly.

1 - The Konica Minolta Printer Error Code 0094 Speaks about the Connecting Links

While attempting to fix the Konica Minolta Printer Error Code, it becomes paramount that all the connecting links are checked starting from the M2-PRCB PJ6 connector and then moving ahead by including the M2 and the IDC-PRCB PJ24 connectors in the check-up routine.

2 - The Konica Minolta Printer Error Code 107 Tells about the Closed SMB Port

Here the main objective is to provide permission to the TCP 445 port in your computer’s firewall which will open up the port thus enabling File and Printer sharing in Windows Settings Segment.

What you also have to set correctly is actually the “Shared Folder” arrangement by scrutinizing its access rights in your given case which will help you fix this Konica Minolta Printer Error Code.

3 - The Konica Minolta Printer Error Code 535 Arises while Scanning and Emailing a Document

To fix this specific error you must ascertain whether there has been a change in your email that is linked with your Konica Minolta printer and if it is so then you must make sure that such new email is paired up with the Konica Minolta Printer.

4 - The Konica Minolta Printer Error Code 57 Emanating due to the Printer’s Failure in Collaborative Editing

To fix this you have to enable the SMBv1 feature by typing in the following command in the Command Prompt window.

"sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start=auto"

5 - The Konica Minolta Printer Error Code C0202 Caused due to the Jammed Paper

The solution for the Konica Minolta Printer Error Code C0202 is simple as it prescribes doing the following things in succession.

Step 1 - Just pull off the Power Plug followed by emptying the paper tray.

Step 2 - Also, cause to take out any jammed paper stuck between the rollers.

Step 3 - Finally place all the components in their exact locations and slots.

6 - The Konica Minolta Printer Error Code C0500 due to the Heating Element’s Abnormality

Step 1 - As far as you want to fix the Konica Minolta Error Code C0500 you must first turn off your printer followed by pulling away the plug from the power socket.

Step 2 - You must check whether the Heater Lamp fuse gets “ON” along with the Power Switch. If it doesn’t then you must replace the Heater Lamp Fuse using the technical manuals and guides.

Step 3 - If the Konica Minolta Printer Error Code C0500 is still flashing then you must consult a technician as the other components like Roller Thermostat or the Interlock Switches may be the culprit this time.

7 - The Konica Minolta Printer Error Code C2152 Flashes Due to the Transfer Belt Retraction Dysfunction

Step 1 - Remove the transfer belt from its casing without bumping the sensor plates.

Step 2 - Using cotton pads soaked in alcohol clean the ink stains including the sensor plates.

Step 3 - Reinstall all the components in their respective sockets and housing.

Step 4 - Now switch off the printer and wait for 20 seconds at least followed by pressing the Utility Button while still holding the Power Switch which will eventually reset the troubleshooting procedure.