How do I Fix My HP Printer Fuser Error?

Fix HP Printer Fuser Error:

HP printer fuser error occurs when the printer is not able to print anything due to some internal issues. I will discuss a few troubleshooting techniques to resolve the problem, make sure to follow them carefully.

Reboot the HP Printer: The HP fuser error is associated with general malfunction and internal conflict. The reason being overused, so we recommend the user to reboot or power cycle the setup to resolve the issue.

Switch off your printer for around 30 seconds along with all the devices like your computer and wifi connection to it. Restart it after 30 seconds to see if the issue has been resolved, otherwise move to the next step.

Update the Firmware and Drivers: Firmware and Drivers play a very important role in keeping your HP router functioning. If one or the driver fails, or if there are any available updates make sure to install it.

Head over to the official website of HP Printer in your region. Go to its drivers and Downloads section. Enter the model number of your device and all the related drivers and firmware will get listed. Download and install an updated driver or firmware to your HP printer and see if the HP printer fuser error issue has been resolved.

Reset Your Printer: If any of the above-mentioned steps did not resolve the issue, the final stage is to reset your printer settings to default. This will wipe out any changes made into your printer machine and hopefully even the issue causing the hp Fuser error.

So head over to the settings on the application. And reset it to default from there. When prompted whether you are sure or not, select Yes.

This is how to fix HP printer fuser error, in case you have any doubts or queries regarding the mentioned steps, feel free to contact our HP Printer FORUM have easy and affordable solution every time.

Fix HP Printer Fuser Error:

Is your printer device displaying a fuser error on the screen, which is not enabling you to print the documents? If yes, then here we are available with the solutions that can help you fix this HP Printer Fuser Error problem.

Method 1: Reset Your Printer Device

One of the best ways to fix HP printer fuser error issue is to reset your printer device. Carry out the steps given below in order to reset your HP printer.

Step 1: Power off your printer device by pressing the on/off button.

Step 2: Remove the power wire from the side of your printer device.

Step 3: Wait for half a minute and connect your power wire to the side of the printer.

Step 4: Press the on/off button to power on your printer device and then wait for your printer device to restart.

Step 5: Try to print one more time.

If the above mentioned steps help in fixing the issue that is given above, then you must not move forward with other solutions that can help you fix this fuse error. If the issue is still there, then you can fix it by trying out the next solution.

Method 2: Wait for 25 Minutes After Resetting Your Printer

In case the fuser temperature is too much, then the device will become really hot. Mentioned below are the steps that you are required to carry out to turn off your printer machine and cool down your fuser.

Step 1: Power off your printer by pressing the on/off button.

Step 2: Remove the power wire from the side of your printer machine.

Step 3: Wait for a duration of 25 minutes and then connect the power wire to the side of the printer again.

Step 4: Power on your printer device by pressing the power button. Now, wait for some time for your printer device to start.

Step 5: Try to print one more time. If the problem gets fixed, then don’t go further with troubleshooting. If the problem is still persisting, then try out some other solution.

Method 3: Connect Your HP Printer Device to the Power Source and Reset your hp Printer Machine

Power related issues can further lead to fuser issues. Carry out the necessary steps to check if there are any surge protectors which are faulty in nature. This method has two parts.

a) Connect Your HP Printer Device to the Power Source

• The first thing that you need to do is to power off your printer device by pressing the power button.
• Remove the power wire from the side of your printer device.
• In case you are making use of a surge protector, disconnect the power wire and connect it to the electrical outlet directly.
• Now, reconnect the power wire to the side of your printer device.
• After that, turn on your printer device by pressing the power button. Wait for the power device to restart.

b) Try to Print one More Time

Try to print a document once again. If the above mentioned steps help you in fixing the problem, then you can skip further troubleshooting. If not, then you can try solving it by trying out the next solution.

Solution 4: Service Your HP Printer

Replace your HP printer device or service it if none of the above mentioned solutions help you in resolving this issue.

So, these are some of the solutions that you can try out to fix HP printer fuser error.